Engine Series

ITEM NO: JDCX1627
Made of heat treated and tempered Chrome Vanadium Alloy Steel
For removing and installing diesel filter elements from filter housings mainly on 2.0 and 2.2 HDi engines
Special design with fuel drain valve groove to prevent damage to the plastic cover
Application:
Citroën: C4, C4 Picasso, C5, C8, Jumpy
Fiat: Scudo, Ulysse Mk II
Ford: Focus, Focus C-Max, Galaxy, Kuga, S-Max
Peugeot: 307, 308, 407, 607, 807, Expert
Volvo: C30, C70, S40 Mk II, V50
Land Rover, Mitsubishi
Engines: 2.0 HDi, 2.2 HDi, 2.0 TDCi, 2.0 JTD
DIN 3120

ITEM NO: JDCX1632
Made of heat treated and tempered Chrome Vanadium Alloy Steel
For removing and installing the diesel filter element from the filter housing on Ford 2.0 EcoBlue TDCi engines (from 2016)
Special design with fuel drain valve groove to prevent damage to the plastic cover
Application:
Ford: Transit, Transit Custom, Tourneo Custom
DIN 3120

ITEM NO: JDCT0101
Full-metal housing made of copper alloy with chrome plating is durable and resistant to abrasion
Designed to quickly and accurately test the density of the electrolyte in the battery and the concentration of urea in the AdBlue tank
Also suitable for measuring the strength and concentration of antifreeze and screenwash fluid
Built-in ATC Compensation range (Automatic Temperature Compensation) in between 10 °C to 30 °C. Recalibration is not required after changes in ambient operating temperature
Adjustable manual focus with soft rubber eyepiece for comfortable viewing
Supplied with a calibration screwdriver, transparent transfer pipette and storage case

ITEM NO: JDCS2101
Specially designed to detect the concentration of ethylene glycol based anti-freeze and coolant
Ideal for preventing water from freezing up in winter and engine from overheating in summer
Easy to operate and the dial type gauge for accurate reading of concentration of anti-freeze and coolant
The transparent plastic housing is convenient for checking the fluid condition and inspecting for any rust, sludge or other deposits
Displays freezing and boiling temperatures in °C and °F
Made of durable and corrosion-resistant PS plastic material
Suitable for all cars and light truck cooling systems
Freezing Point: -12°C to -43°C (10°F to -45°F)
Boiling Point: 125°C to 131°C (257°F to 268°F)

ITEM NO: JDCS1101
Specially designed for testing the charge state of Lead-Acid Battery (standard batteries)
Easy to operate and the dial type gauge for accurate reading of battery fluid specific gravity
Avoid dead battery or overcharging, effectively extending battery life
The transparent plastic housing is convenient for checking fluid conditions
Made of durable and corrosion-resistant PS plastic material
Application: 6, 12 and 24 Volt Systems
Specific gravity range: 1.1-1.3 Kg/L

ITEM NO: JGAI0706
BLOW CASE: W345 × D305 × H90 (mm)

ITEM NO: JGAI0703
BLOW CASE: W592 x D261 x H62 (mm)

ITEM NO: JGAI0404E
BLOW CASE: W322 x D250 x H70 (mm)

ITEM NO:JGAI1204
BLOW CASE: W380 x D310 x H80 (mm)

ITEM NO: JGAI0402
BLOW CASE: W260x D170 x H60 (mm)

ITEM NO: JGAI0906
BLOW CASE: W300 x D202 x H67 (mm)

ITEM NO: JGAI8101
BLOW CASE: W380 x D430 x H160 (mm)

ITEM NO: JGAI1302
BLOW CASE: W380 x D310 x H80 (mm)

ITEM NO: JGAI1802
BLOW CASE: W470 x D405 x H110 (mm)

ITEM NO: JGAI2801
BLOW CASE: W600 x D510 x H110 (mm)

ITEM NO: JGAI0302
BLOW CASE: W390 x D330 x H100 (mm)

ITEM NO: JDAW1602
Full circle 360° angle scale. Clearly marked in 2 degree increments & in intervals of 10 & 30 degrees
Adjustable arm keeps angle gauge scale stationary, wedge it against object while turning drive tool
Accommodates 1/2" male and female square drive

ITEM NO: JDAW1601
Full circle 360° angle scale. Clearly marked in 2 degree increments & in intervals of 10 & 20 degrees
With magnetic holder on the flexible reaction arm for the fixing point. Easier to anchor to the engine and keeps angle scale stationary
Accommodates 1/2" male and female square drive

ITEM NO: JDBU0210
Coin-type ramp gauge design to measure all type spark plug gaps easily
Flanged hole design to adjust side wire without damaging center electrode
Dual marked for both Imperial and Metric

ITEM NO: JGAI2402
BLOW CASE: W448 x D310 x H95 (mm)

ITEM NO: JDAN0222
BLOW CASE: W570 x D240 x H60 (mm)

ITEM NO: JDCU6036
Manufactured from high grade carbon steel plate
Specially designed tool for testing for distortion on cylinder heads and engine blocks during engine overhauls and rebuilds
Perfect for checking warpage on engines and machine parts
Use with feeler gauges to check for distortion and alignment in engine blocks, cylinder heads, flywheels and etc.
Suitable for 4 and 6 cylinders engines or smaller engines
Precision ground straight edge to accuracy of 0.05mm
Wide base to stand on edge unsupported
Integrated convenient hanging hole for easy storage
BLOW CASE: W630 x D67 x H42 (mm)

ITEM NO: JGAI1205
BLOW CASE: W320 x D230 x H90 (mm)

ITEM NO: JGAR0201
For hand grinding flat head, unslotted valves
Synthetic rubber vacuum cups are resistant to oil, grease and gasoline
2 pieces in blister card packing

ITEM NO: JDBE series
Suitable to use with standard 1/4" or any electric drill. Use appropriate fluid for cutting lubricant. Interchangeable honing
Designed for general purpose honing and glaze breaking of cylinders, bearing, bores and pipes
Spread limiter and adjustable spring allows easy insertion of hone into cylinder and ensure full stone contact with cylinder walls
Supplied complete with 3pcs grit stones
Application: Automotive brake and clutch cylinders, engine cylinders of motorcycles, lawn mowers, outboard motors, hydraulic cylinders, machine and industrial engines and etc.

ITEM NO: JGAI1502
Special designed tool for re-cutting inlet and exhaust valve seats concentric to the valve guides
Works on both hardened and normal valve seats
Precision machined, high hardness and high wear resistance tungsten carbide cutting blade
Cutter blades can be individually adjusted to optimum adaptation to the valve seat
Clean cut surface with no chatter marks
Suitable for seats where valve sizes range from 28 to 65 mm in diameter
BLOW CASE: W302 x D231 x H50 (mm)

ITEM NO: JLAF series
For general purpose honing and glaze breaking
Silicon carbide grinding stones bonded to holders
Set includes 3pcs stones and cotter pins

ITEM NO: JGAI0702
This tool kit is designed to compress and release valve spring after removing the collets
Arched-type steel tube lever ensures a consistent coaxial contact with the valve
Includes 5 interchangeable driving adapters to fit valve springs: 16mm, 19mm, 23mm, 25mm, 30mm
Driving adapters are made of heat treated Chrome Molybdenum Steel
2 lengths of pressure screws: 50mm & 90mm
Application: Cars, motorcycles, small bore engines and etc.
BLOW CASE: W340 x D195 x H50 (mm)

ITEM NO: JDAN0330
Designed to remove valve springs and spring retainers quickly without removing cylinder head
Cam action level design for secure valve spring locking into the tool
Adjustable depth and dual-size drive adapter, fits most large and small valve springs
Suitable for use on a wide range of OHV, OHC and CVH engines

ITEM NO: JDAN0143
Designed to quickly and easily compress valve springs on multi-valve petrol and diesel engines
Keep valve springs positively compressed during maintenance and repair work
Direct action compressor lever for better access
Suitable also for general use on OHC, OHV and CVH engines
Includes two valve spring pushers, which fit valve spring retainers up to 25mm (1") and 30mm (1-3/16")
Jaw opening of 35mm to 200mm (1-3/8" to 7-7/8") and a throat clearance of 250mm (9-13/16")

ITEM NO: JDAT series
Hardened jaws manufactured from chrome molybdenum alloy steel
Serrated tip inside the jaws firmly grips both original equipment and aftermarket valve stem seals
Small head and extra long neck design allow the tip to reach into confined area of the seal for easy removal
Ideal for removing valve stem seals in multi-valves engine

ITEM NO: JDAK0132
Removes Oil & Grease Seals
Two Tips Fit Most Application

ITEM NO: JGAI0101
Designed for quick and easy removal of stubborn diesel injectors
Suitable for Bosch & Lucas type diesel injectors
Slide hammer mechanism completed with M8, M12/M14 adapters
Includes M17 adapter for GM Vauxhall / Opel injectors (X20DTH / Y20DTH series engines)
BLOW CASE: W292x D116 x H57 (mm)

ITEM NO: JGAI0103
BLOW CASE: W300 x D90 x H65 (mm)

ITEM NO: JGAI1404
Specially designed tool kit to clean injector port and seating surface prior to fitting new injectors
Efficiently cleans carbon deposits and greasy dirt in the diesel injector seat
Provides a smooth contact surface for the injector seat and helps to avoid blowback caused by poorly seated injectors
Features reusable plugs to prevent contaminants and debris from falling into cylinders during cleaning process
Suitable for all common rail diesel engines
BLOW CASE: W360 × D142 × H62 (mm)

ITEM NO: JGEW450A
For sealing injector ports on common rail diesel injection systems ( CDI ) 
Suitable for most of popular nozzles of injector system
Use to install in the diesel injector after removing the old damaged washers or when changing new injectors
Kit contains 450 pcs copper seals/washers, 30pcs for each size
PLASTIC CASE: W205 × D145 × H39 (mm)

ITEM NO: JGAI0704
Designed for cleaning and refacing diesel injector seats within the cylinder head
Use to clean and decarbonise injector seats when changing injectors
Kit includes 4 cutting/reaming heads to suit most common injector seats
Suitable for standard and common rail diesel applications
BLOW CASE: W217 x D165 x H50 (mm)

ITEM NO: JDAR1222
Made of Chrome Molybdenum Steel, Heat Treated, Black Oxide Finish
Remove & install sensors on computerized engine control vehicles
3/8" Dr. 7/8" (22mm) 6PT socket with cutaway length 30mm Portion for wire clearance
Offset design for confined areas
CR-MO

ITEM NO: JDAR0122
Made of heat treated, durable Chrome Molybdenum Alloy Steel
Remove & install sensors on computerized engine control vehicles
7/8" (22mm) Hex, 1/2" Square Drive (double square for easy access)
Socket with cutaway portion for wire clearance
Offset design for confined areas
Material: CR-MO
Finish: Black Oxide

ITEM NO: JDAQ1627
Made of Chrome Vanadium Steel, Heat Treated, Black Oxide Finish
Remove & install sensors on computerized engine control vehicles
1/2" Dr. 1-1/16" (27mm) 12PT socket with cutaway portion for wire clearance
CR-V

ITEM NO: JDAQ0122
Made of heat treated Chrome Vanadium Steel
Install and removes oxygen sensors and vacuum switches on computerized engine control vehicles
22mm (7/8") 6-point socket with cutaway slot provides extra clearance for sensor wires
Use with 3/8" square drive tools or 1" open-end wrench on the external hex
Black phosphate finish for added corrosion resistance
CR-V

ITEM NO: JDAQ1622
Excellent tool for removing and installing Oxygen (Lambda) sensors
Special slot in the side of socket for sensor wire clearance
Hardened and tempered socket for extra durability
Material: Chrome Molybdenum Alloy Steel
Drive: 1/2" Square Drive
Size: 22mm (6-point)
Finish: Chrome Plated
CR-MO

ITEM NO: JGAI1402
Popular keys for draining differentials, sumps, axles and gearboxes on most modern vehicles
Drain plug keys made of hardened and tempered chrome vanadium steel
Suitable for use with 3/8" square drive tools
Applications: BMW, Citroen, Fiat, Ford, Honda, Lancia, Mazda, Mercedes, Nissan, Peugeot, Renault, Toyota, Volvo, Volkswagen and etc.
CR-V
BLOW CASE: W220x D90 x H47 (mm)

ITEM NO: JGAI1403
Popular keys for draining differentials, sumps, axles, gearboxes on most modern vehicles
Drain plug keys made of hardened and tempered chrome vanadium steel
Suitable for use with 17mm wrenches or sockets
Black phosphate finished
Applications: BMW, Citroen, Fiat, Ford, Honda, Lancia, Mazda, Mercedes, Nissan, Peugeot, Renault, Volvo, Volkswagen and etc.
Chrome Vanadium Alloy Steel
BLOW CASE: W255 x D120 x H40 (mm)

ITEM NO: JGAI0701
Set contains 7 assorted sockets for removal and installation of Oxygen Sensor, Oil Pressure Sending Units and Vacuum Switches
Specially designed tools to use and work on a variety of vehicles
Sockets are made of heat treated, durable chrome vanadium alloy steel (A-E) and chrome molybdenum alloy steel (F&G)
BLOW CASE: W232 x D203 x H54 (mm)

ITEM NO: BSBA series
Professional quality, 12-point deep sockets manufactured from hardened and tempered Chrome Vanadium Steel
Designed for easy installation or removal of the deep-seated (deeply recessed) spark plugs
Fitted with a rubber insert for plug protection and retention
Knurled finger grips for hand starting
Polished chrome plated
Mirror Polished
CR-V

ITEM NO: JGAI1003
Ideal for repairing and restoring damaged spark plug thread
For most commonly used metric bolt size M14, suitable for machine construction, engine repair and other automotive applications
BLOW CASE: W250 x D128 x H41 (mm)

ITEM NO: JGAI5601
Ideal for repairing and restoring damaged spark plug thread
Completed set for easy and quick repairs of spark plug, thread insert size- M10, M12, M14
Each size includes stainless steel screw coils, thread tap & Coil Shielding Collar, Coil Installation Shank and Hex Key Wrench
BLOW CASE: W298x D298 x H62 (mm)

ITEM NO: JGAI0301
6-point socket made of hardened and tempered chrome vanadium steel
Internal rubber retaining ring for positive retention of plug in socket
180° universal joint design allows easy access in confined engine bays
Suitable for the removal and replacement of glow plugs in most popular diesel engines
Matt chrome plated finish
Application: Mercedes, Audi, VW, Opel, Fiat and etc.
CR-V
BLOW CASE: W120 x D81 x H36 (mm)

ITEM NO: JABA series
Made of high grade special tool steel
For installing and removing piston rings
Bright nickel-plated

ITEM NO: JACA0515
Designed for damage-free removal and installation of piston rings
Special tapered jaw allows safe and positive manipulation of piston rings
Return spring mechanism for easy handling
Comfortable, non-slip grip handle
Suitable for most cars and light commercial vehicles
Works on most common piston diameters and rings from 1.2 to 6.4 mm thick
Piston Ring Diameter Clamping Range: Ø50-150 mm
Overall Length: 170 mm

ITEM NO: JDCV0205
Quick and reliable removal of carbon deposits from piston ring grooves
Suitable for piston sizes from Ø51mm to Ø127mm
Three 6-bladed cutters cover all major piston ring grooves
    Blade #1: 1/16", 5/64", 3/32", 1/8", 5/32", 3/16"
    Blade #2: 2, 2.5, 3, 4, 4.5mm & 1/4"
    Blade #3: 1.2, 1.5, 1.8, 2.8, 5, 5.5mm

ITEM NO: JAAA series
TOPTUL Piston Ring Compressor is designed for quick and easy compression of piston rings. The compressor folds around the piston, holding the rings in the grooves and allowing the piston and ring assembly to slide into the cylinder block without the risk of damaging the pistons or rings.
SUS

ITEM NO: JJAH series
Heavy duty heat treated chain
Chrome molybdenum steel handle
Serrated jaws allows firm ratcheting action in either direction
Long steel handle for added leverage
Cushioned soft grip allows a better grip and less hand fatigue
Ideal for filter removal, turning larger pipes and holding pulleys

ITEM NO: JJAH
Special-purpose oil filter strap wrench
One piece forged construction for maximum strength and durability
Rubber coated on the strong woven strap to prevent slipping
Perfect use for polished pipes, plastic pipes and fittings against with scratch damage or deformation

ITEM NO: DMAC1A10
Made of drop forged Chrome Vanadium Alloy Steel
Precision machined & hardened jaw teeth are capable to grip objects firmly
Serrated jaw design easily clamps oily and stubborn filters without slipping
Strong locking mechanism with one-hand quick release lever
Jaw opening adjustment screw to fit most oil filters
Ideal for a secure grip when removing and installing different types of oil filters
Filter gripping capacity: 53 to 118mm (2-1/8" to 4-5/8") in diameter
Nickel plated finish for excellent corrosion and wear resistance

ITEM NO: JDAA series
Drop forged construction for high strength and durability
Multi-position slip-joint design provides a quick adjustment of jaw opening
Serrated jaws and long handles for extra grip on oily and stubborn filters
Double dipped non-slip plastic grip handles for added comfort and control

ITEM NO: JDAU series
Heavy duty oil filter wrench
Swivel handle allows user to reach filters in hard to reach places
Wide band securely grips filters without crushing
Easy grip comfortable handle

ITEM NO: JDDA1612
Removes any oil filters up to 4-11/16" (120mm) diameter
Chain style enables to grips oil filter tightly
Use with 1/2" square drive tools or 13/16" (21mm) wrench

ITEM NO: JDAZ65B0
Durable steel strap
Light and strong aluminum alloy structure
Turn knob adjustment
Removes filters with minimal risk of damage
Ideal for automotive oil filter replacement
Suitable for one-hand operation in areas of restricted access

ITEM NO: JDBA series
Tempered and hardened high-grade tool steel chain and body
Double-hinge construction for high clamping power
Ratchet-style action design works in both directions
Flexible handle enables to work in narrow spaces
Non-slip, comfort plastic coating handles
Ideal for automotive oil filter replacement
Handle length: 230mm (9")

ITEM NO: JDAV1615
Removes any oil filters up to 6" (152mm) diameter
Strong, non-slip nylon webbing strap
Use with 1/2" square drive tools

ITEM NO: JDAV1630
Removes any oil filters up to 12"(300mm) diameter
Strong, non-slip nylon webbing strap
Use with 3/8" or 1/2" square drive tools

ITEM NO: JGAR0302

ITEM NO: IMAA1000
Lightweight aluminum alloy housing
Hardened stainless steel spindle and clamping shaft
58 mm Dial Face is clearly marked and easy to use
For measure surface flatness as well as axial runout
Also can be used with dial gauge adapter to check the TDC position on engine. Use with TOPTUL JGAI0403 (4PCS VAG Engine Timing Tool Set) to give an accurate reading for TDC
Metric scale with 0.01 mm graduations
Measure range: 0-10 mm

ITEM NO: JGAI0403
BLOW CASE: W340 x D110 x H47 (mm)

ITEM NO: JDBR2065
Special design to lock the crankshafts on VW, AUDI, SEAT, SKODA, 2.0 TDI engine and etc.

ITEM NO: JGAI1203
BLOW CASE: W300 x D207 x H62(mm)

ITEM NO: JGAI0603
Made of heat treated, durable Chrome Vanadium Alloy Steel
For quick removal and installation of the oil filter canisters and covers when replacing the oil filter insert
The 6-point hex wall construction enables firm grip on the filters without damage to the filter housing
Extra low profile design for use in confined spaces
Withstands up to 180 Nm (133 Ft-Lb) of torque applied
Use with 3/8" square drive tools
Application: Audi, BMW, Cadillac, Ford, GM, Mercedes-Benz, Mini, Nissan, Opel, Renault, Seat, Škoda, Vauxhall, VW and etc.
BLOW CASE: W210 x D150 x H50 (mm)

ITEM NO: JDDH6500
Robust one piece aluminum casting alloy construction
Special cup type wrench for quick installation and dismantling of the oil filter caps when replacing the oil filter insert
Multiple contact points to reduce rounding and allow easy removal of the caps
Suitable for 4-cylinder petrol and diesel engines from 1.8L to 2.0L
Use with 3/8" square drive tool or 27mm wrench/socket
Application: Toyota vehicles such as Allion, Auris, Corolla Axio, Isis, Ist, Corolla Rumion, Corolla, Fielder, Noah, Premio, Prius, Voxy, Wish and etc.

ITEM NO: JDDH6501
Robust one piece aluminum casting alloy construction
Special cup type wrench for quick installation and dismantling of the oil filter cap when changing the oil filter insert
Multiple contact points to reduce rounding and allow easy removal of the caps
Suitable for 4, 6, 8-cylinder diesel engines
Use with 3/8" square drive tool or 27mm wrench/socket
Application:
Toyota vehicles such as all V6 (2007-2008), 4-cylinder Corolla (2007-2009), V8 Tundra (2007), V8 Sequoia (2008), V8 Land Cruiser (2008-2010), 4 and 6-cylinder 4Runner (2008-2010)
Lexus vehicles such as all vehicles (2006), ES350/GS350/GS450h/LS460/RX350 (2007), LS600hL (2008), LX570 (2009)

ITEM NO: JDDV1627
Made of durable forged and hardened tool steel
Specially shaped tool allows easy removal and installation of hard to reach oil filter caps when replacing the oil filter cartridge
Remove the oil filter housing by using the 27mm bi-hex spanner end driven by a 1/2" square drive
Suitable for PSA and Ford 2.0 Duratorq TDCI / HDI (DW10C) and 2.2 Duratorq TDCI / HDI (DW12C) diesel engines
Equivalent to OEM 303-1579
Application (e.g.):
Ford: Mondeo, Galaxy, S-Max, Kuga, Focus
Citroën: C4, C5, C8, DS4, DS5
Peugeot: 308, 3008, 508, 5008, 407, RCZ

ITEM NO: JDAH series

ITEM NO: JDAI65A2
Adjustable 3-jaw design oil filter wrench
Removes or tightens oil filters from 65 to 120mm in diameter
For both clockwise and counterclockwise operation
Gear-driven and heat-treated jaws for high torque application
Includes extra 1/2" (F) to 3/8" (M) drive adapter
Use with 1/2" drive or 3/8" drive tool or 21mm wrench/socket

ITEM NO: JDAA0808
Specially designed tool to install and remove the oil filter easily and quickly
Steel jaws securely grip the oil filter without slipping
Use with 3/8" square drive tool or 17mm wrench
Filter gripping capacity: 65 to 95mm (2-9/16" to 3-3/4")
Material: CR-MO (SCM4130)

ITEM NO: JDCA series
Made of premium Chrome Molybdenum Alloy Steel
Two-way, adjustable jaw design remove and install oil filters without damaging the filter housing
Self-locking by inside spring mechanism for more efficient fitting and removal
Special serrated jaws for clamping the filter firmly without slipping
Use with 1/2" square drive tool

ITEM NO: JGAI1601
Low profile design withstands up to 115Nm (85 ft-lbs) of torque
Mainly suitable for European vehicles
BLOW CASE: W446 x D318 x H90 (mm)

ITEM NO: JGAI1401
High strength all metal construction
Low profile design withstands up to 115Nm (85 ft-lbs) of torque
Cup-shaped wrench grips firmly as a socket on oil filter eliminating crushing of the filter
Coated with electro-black oxide finish for long life protection against rust
Set includes 1/2" (F) to 3/8" (M) drive adapter
14 different styles and sizes of wrenches fit from 64 to 100mm oil filters in diameter
Mainly suitable for Japanese vehicles
BLOW CASE: W415 x D264 x H81 (mm)

ITEM NO: JGAI1602
BLOW CASE: W305 x D248 x H76(mm)

ITEM NO: JGAI0501
BLOW CASE: W216 x D165 x H51(mm)

ITEM NO: JGAI0803
BLOW CASE: W330 x D235 x H50 (mm)

ITEM NO: JGAI1803
BLOW CASE: W450 x D320 x H55 (mm)

ITEM NO: JGAI1004
BLOW CASE: W328 x D268 x H72(mm)

ITEM NO: JDDP1765
Suitable for the BMW twin camshaft engines M42, M44, M50, M52, S50 and S52 with VANOS unit
For turning sprockets when removing and installing VANOS unit

ITEM NO: JDAF1437 / JDAG1437
To lock the pulley during removing or assembling any type of pulley retaining bolt
High flexibility outperforms the traditional standard strap or chain wrench and will not damage components
Ideal for water pump, alternator pulleys and various electric motor pulleys of compressors, washing machines, tool machines and etc.
Also suitable to rotate the camshaft when timing the engine or removing oil and gasoline filters

ITEM NO: JGAI2201
BLOW CASE: W445 x D190 x H45(mm)

ITEM NO: JDAX0102
A mechanic's stethoscope is a sensitive instrument. It can be fitted with a variety of ends, including needle probes and rubber trumpets
Specially designed for automotive use

ITEM NO: JDBV3984
Wire brushes remove corrosion build-up on battery pole and terminals for improved electrical contact
The external brush cleans cable clamps, and the internal brush cleans battery poles
Metal case battery brush

ITEM NO: JDBP1703
Steel construction
2-pin timing belt tensioner tool
Pin diameter: 3 mm
Offset design
Useful for camshaft spur belt tension adjustment
Application: VW, AUDI and etc.

ITEM NO: JDBX0241
Used for locking deep-drawn water-pump pulley
Easy loosening of stubborn screws on the water-pump pulley
Ideal for Audi and Volkswagen vehicle's engine when air conditioning is also built in
Comfortable plastic grip handle
Application: Audi, VW and etc.

ITEM NO: JDBX0115
Designed for locking on water-pump pulley
Easy loosening of stubborn screws on the water-pump pulley
1/2" square drive in the handle to allow extension of the tool
Application: Audi 80/A4, VW Golf, Polo, Passat and etc.

ITEM NO: JDED0101
Made from durable Chromium Molybdenum Alloy Steel
Specially designed tool for safely removal and installation of stretch drive belts, alternator drive belts, accessory drive belts and etc.
Double sided design tool for mounting on both the front or back side of the pulley
Compact, one-piece construction with magnetic faces hold the tool securely in place on the pulley
Effectively prevents damage to belt and pulley during removal or installation
Suitable for most stretch belt applications

ITEM NO: JDFD0120
Specially designed tool for adjusting the tension of drive belts where the movement of the timing belt is measured by load (daN) (1daN=10N)
Precisely measure the tension required to press down the timing belt in order to adjust the position of the timing belt tensioner pulley to an accurate position
Universal tool allows the correct adjustment and tension settings on drive belts with various widths and thicknesses
Dual direction rotating scales with clear Incremental markings readable from both front and back side of tool
Knurled grip design with smooth rolling screw action for maximum grip and durability
Suitable for use with different types of vehicles

ITEM NO: JDDD1216
Designed for effective removal of stubborn or seized ribbed crankshaft pulleys and auxiliary pulleys
Precision machined grooves firmly grip the pulley without causing damage
Low-profile arms allow use in restricted spaces and locking bolts help prevent slipping under tension
Use with 17mm wrench or 3/8" square drive tools
Suitable for V-ribbed belt pulleys used on crankshafts, alternators, air conditioning units and water pumps
Applicable pulley size from 35 up to 160mm in diameter

ITEM NO: JGAI1101
BLOW CASE: W710 x D105 x H55 (mm)

ITEM NO: JGAI1102
Specially designed tools for releasing or installing hard-to-reach lock nuts and component mounting bolts on tensioner, timing or auxiliary pulleys
Extra-long and slim profile handle provides optimum leverage and allows easy access in confined space
Quick-connect interchangeable head enables fast change of different sizes of adapters
Universal design fits most common types of vehicles
Kit contains 4 double-ended adapters (12x14, 13x15, 16x17, 18x19 mm), 5 single-ended adapters (E10, E12, E14, E16, E18), a socket adapter (15mm Hex. x 3/8" DR.) and a long curved drive handle
BLOW CASE: W480 x D101 x H56 (mm)

ITEM NO: JGAR0301

ITEM NO: JGAI0602
Made of impact quality Chrome Molybdenum Alloy Steel
Suitable for removing and installing the HGV cylinder head bolts
Black phosphate finish for extended corrosion resistance
Applications:
17mm (12pt) For MAN, Mercedes-Benz 400/420/500
19mm (12pt) For Mercedes-Benz 300/400/900 Actros
E18 For MAN M2000 and MAN buses with D08 engines
E20 For MAN F2000, F90, F8 and MAN buses with D25/D28 engines
E22 For MAN TGA engines
E24 For MAN D20 engines
BLOW CASE: W272×D212×H59 (mm)

ITEM NO: JDDF1610
Made of heat treated and tempered Chrome Vanadium Alloy Steel
Designed to loosen or tighten the unique bolt securing the pulley to the belt tensioner in most 1ZZ and all 2ZZ TOYOTA engines
Special 6 point female ribe socket
Use with 1/2" square driver tool or 21 mm wrench / socket
Application: TOYOTA models including Celica, Corolla, Matrix, MR2 and etc.

ITEM NO: JDDF1612
Made of heat treated and tempered Chrome Vanadium Alloy Steel
Designed to loosen or tighten the engine head bolt and flywheel center bolt on NISSAN vehicles
Special 6 point female ribe socket
Use with 1/2" square driver tool
Application: NISSAN models with E16, QR25 engines and etc.

ITEM NO: BCYA series
For cylinder-head bolts on VW, Audi engines and etc.
Long reach and slim shank design allows easy access to recessed cylinder-head bolts
Satin Chrome Finished
CR-V+S2

ITEM NO: JEL-0810
Chrome Vanadium Steel Material
Bent, size 8mm and 10mm outside male square
Suitable for the removal of oil drain and filler plug on gearbox, sump and differential
Applications: Citroen, Peugeot, Renault and etc.
CR-V

ITEM NO: JDBB1617
Made of Chrome Vanadium Alloy Steel
For removing and installing of the gearbox drain plug
Operated by 17mm wrench or socket
Application: Audi, VW oil screws and etc.
Black Phosphate Finished

ITEM NO: JDBC1616
Made of expert quality, hardened and tempered Chrome Molybdenum Steel
A special 12 point (triple square) tamperproof socket used to remove the transmission drain plug
Tamperproof design for removing and installing the oil release bolts/screws on the transmission and gearbox
Application: Audi A4-A6, VW Passat, Porsche Boxster and etc
Black Phosphate Finished
SNCM+V

ITEM NO: JDBD3317
Made of Chrome Vanadium Alloy Steel
Special design to stop the pulley and remove the centre bolts for removing and installing the V-belt pulley at the generator
Use with 17mm wrench and spline bit socket (M10) to remove and install the socket
Applicable: VW Golf 3, Vento, Passat, AUDI A3, VOLVO and etc
CR-V

ITEM NO: JDCD3310
The two-part alternator socket allows easy removal and replacement of the free-wheel drive pulley at the alternator
This tool allows the alternator to be locked by the M10 spline bit socket insert and enables the central locking bolt of the pulley to be loosened or tightened by the serrated reaction nut
Use with 17mm wrench
33 teeth hexagonal reaction nut, O.D. 19.5mm
Applications: BMW, VW, Audi, Ford, Skoda, Mercedes, Porsche, Renault and etc.

ITEM NO: JDCD3350
The two-part alternator socket allows easy removal and replacement of the free-wheel drive pulley at the alternator
This tool allows the alternator to be locked by the T50 star bit socket insert and enables the central locking bolt of the pulley to be loosened or tightened by the serrated reaction nut
Use with 17mm wrench
33 teeth hexagonal reaction nut, O.D. 19.5mm
Applications: Mercedes, Renault and etc.

ITEM NO: JGAI1301
Designed for the easy removal of alternator free-wheel drive pulleys either on or off the vehicle
Locks the alternator, allowing the central locking bolt of the pulley to be released
Applications: BMW, VW, Audi, Mercedes, Renault, Ford, Porsche, Fiat and etc.
BLOW CASE: W245x D145 x H45 (mm)

ITEM NO: JDAM0163
For replacement of fuel, oil and water hose
Hose clamp with flexible 630 mm wire
Suitable to work in hidden areas and long distance

ITEM NO: JDAM series
Designed for releasing and refitting most of spring hose clamp
For use with 14mm wrench or 1/4" square drive tools
Suitable for using in confined space

ITEM NO: JDCB0117
Made of Chrome Molybdenum Alloy Steel
Ideal for removing and fitting fuel gauge sender collars to avoid damage
3 jaws design to ensure holding power while decrease risk of damage the plastic collar
Use with a 16mm wrench or socket
Suitable for most collar from 89 to 170mm

ITEM NO: JDCB0219
Hardened jaws manufactured from Chrome Molybdenum Alloy Steel
Designed for the quick removal and installation of fuel pump retaining rings on fuel tanks
Special curved jaw design allows easy and firm grips on different retaining rings
Fully adjustable jaws to suit most collars from 55 to 199mm in diameter
Use with 3/8" square drive tool
Application: BMW, Mercedes-Benz, Audi, VW, Toyota, Lexus, Nissan, Mazda, Ford and etc.

ITEM NO: JDBY0109
Perfect tool for releasing connections on fuel pipes during engine service or when replacing fuel filters
Specially made tip pliers is designed to compress the quick connect lugs for easy removal without damaging the connectors
Made of high grade hardened tool steel
Ergonomic comfort-grip handle
Applications: VW, Audi, Fiat, GM, Opel, Vauxhall, Mercedes-Benz and etc.

ITEM NO: JGAR0203
Expert quality, use on brake and fuel supply lines to prevent fluid leaks and contamination during service
Spring loaded design for easy and fast operation
Heavy-duty construction for the strength and durability
4 in 1 design: Suitable for Banjo, 5/16" (8mm), 3/8" (9.5mm), and 1/2" (12.7mm)

ITEM NO: JGAR0701
Specially designed tool to quickly disconnect the spring lock couplings on air conditioning lines and quick connect couplings on fuel lines
Made of fuel and solvent resistant POM plastic
Each tool is color-coded by size for easy identification
Assorted sizes fit most applications
Ideal for use in confined spaces
Suitable for Chrysler, Ford, GM, Opel, Saab, VW and etc.

ITEM NO: GAAR0401
SUS

ITEM NO: JDBW1316
Chrome Vanadium Steel Material.
90° angle for leverage
Professional quality for maximum durability and corrosion resistance
Specially designed and easy access wrench for injection pump. 12-point box end is ideal for fastening and unfastening the injection pump mounting bolts
Applications: 1.6L 4-cyl. Diesel engine AUDI 80, VW Golf, Jetta, Caddy, Passat, Santana, CITROEN